Advanced SmartLink Diagnostic & J2534 PassThru Platform

Professional workshop architecture combining complete vehicle diagnosis, topology mapping, ECU coding, bidirectional testing, J2534 PassThru and SmartLink remote communication.

TOPOLOGY

For supported vehicles, PRO3 V+ Elite displays the vehicle electronic network as an interactive graphical topology map.

Technicians can rapidly identify:

faulted modules · communication failures · network relationships · ECU status · affected control units

and enter supported modules directly from the topology screen.

FULL SYSTEM

PRO3 V+ Elite performs comprehensive electronic-system diagnosis across supported vehicle networks.

Diagnostic access can include Engine · Transmission · ABS · SRS · BCM · Immobilizer · Steering · Suspension · HVAC · Instrument Cluster · TPMS · Gateway · Parking · Lighting and additional installed control systems.

Functions include ECU identification, automatic scanning, DTC reading and clearing, freeze-frame data, live data, graphing, recording, playback and professional diagnostic reports.

SMARTLINK C

The included SmartLink C is considerably more capable than a conventional Bluetooth diagnostic connector.

It supports local Bluetooth / USB diagnostics, CAN FD · DoIP · D-PDU · RP1210 · J2534 communication and professional SmartLink remote workflows.

J2534

SmartLink C can operate as a J2534 PassThru interface with compatible OEM programming software installed on a Windows PC.

Depending on the vehicle manufacturer and OEM software, J2534 workflows may include:

blank ECU programming · module replacement programming · ECU software updates · software restoration · reprogramming using OEM service applications.

OEM software, manufacturer subscriptions and programming authorization are not included.

ECU CODING

PRO3 V+ Elite supports advanced manufacturer-dependent ECU coding and configuration.

Capabilities can include:

online coding · offline coding · variant coding · module configuration · replacement-module setup · adaptation · initialization · personalization · hidden-function activation.

ACTIVE TEST

Send commands directly to supported ECUs to activate vehicle components and confirm their operation.

Available tests can include pumps, injectors, relays, valves, motors, fans, lighting, windows, locks, HVAC components and additional manufacturer-specific actuators.

PIN DETECTION

Pin Detection allows technicians to inspect supported OBD diagnostic socket pins, voltage conditions and available communication protocols.

This helps identify connection or communication problems before beginning deeper electronic diagnosis.

GUIDED

Guided workflows simplify supported diagnosis, basic settings, adaptations, calibration, coding and component replacement procedures.

Available on compatible Volkswagen · Audi · SEAT · Škoda applications.

REMOTE

SmartLink C supports professional remote vehicle communication workflows, allowing compatible remote diagnostic services or another supported X-431 platform to communicate with the vehicle through the SmartLink architecture.

REPORT

Generate vehicle health reports, pre-repair scans, post-repair scans, DTC information and live-data records for workshop documentation and customer reporting.

Passenger Vehicles · SGW/SFD · EV · HD · Motorcycle · ADAS · IMMO

SmartLink-based professional workshop platform with extensive global vehicle coverage and compatibility with the main LAUNCH diagnostic expansion ecosystem.

EUROPE

Abarth · Alfa Romeo · Aston Martin · Audi · Bentley · BMW · Bugatti · Citroën · Dacia · Ferrari · Fiat · Ford Europe · Jaguar · Lamborghini · Lancia · Land Rover · Maserati · Mercedes-Benz · MINI · Opel · Peugeot · Porsche · Renault · Rolls-Royce · Rover · Saab · SEAT · Škoda · Smart · Volkswagen · Volvo

plus additional manufacturer and regional software available through the X-431 software environment.

GLOBAL

Acura · Buick · Cadillac · Chevrolet · Chrysler · Dodge · Ford · GMC · Honda · Hyundai · Infiniti · Isuzu · Jeep · Kia · Lexus · Lincoln · Mazda · Mitsubishi · Nissan · Subaru · Suzuki · Toyota

plus broad Chinese and additional Asian manufacturer coverage.

SGW · SFD

PRO3 V+ Elite is compatible with supported LAUNCH secure-gateway authorization services.

Gateway licences / authorizations are optional unless specifically included.

X-431 FIX

Compatible with the optional X-431 FIX / HaynesPro CarSET Pro European repair-information database.

EV

LAUNCH X431 EV Diagnostic Upgrade Kit + applicable software activation

Compatible for expanded electric-vehicle, New Energy and high-voltage battery diagnostic workflows.

HEAVY DUTY

Because PRO3 V+ Elite already includes SmartLink C, it can be expanded for supported commercial-vehicle and Heavy Duty diagnostics using the required LAUNCH HD Truck Software Authorization + HD Adapter Package.

A separate passenger-car tablet is not required.

MOTORCYCLE

LAUNCH X431 Motorcycle Diagnostic Adapter Kit + applicable software activation

Extends the platform to supported motorcycle diagnostic applications when the required connectors and software are installed.

ADAS

Compatible with LAUNCH X431 ADAS Mobile / ADAS Pro calibration equipment and the corresponding ADAS software activation.

IMMO

TPMS

LAUNCH i-TPMS
LAUNCH TSGUN

Compatible for supported sensor activation, programming, diagnosis and relearn procedures.

MEASUREMENT

O2-2 ScopeBox Oscilloscope
S2-2 SensorBox
VSP-600 Videoscope
BST360 Battery Tester
Compatible LAUNCH Multimeter / Current Measurement Modules

OBD-I

Compatible with the LAUNCH OBD-I / non-16-pin adapter system for supported older vehicles using manufacturer-specific diagnostic connectors.

OPTIONAL EXPANSIONS

Topology · J2534 · ECU Coding · Active Test · 60+ Services

Advanced workshop-level diagnostic, PassThru, coding, service and SmartLink remote diagnostic capabilities.

DIAG

AutoVIN · Automatic Vehicle Scan · ECU Information · Read DTCs · Clear DTCs · Freeze Frame · Live Data · Multi-Data Graphing · Recording · Playback · Diagnostic History · Vehicle Health Reports · Pre / Post Scan

TOPOLOGY

Graphically displays supported ECU networks to identify:

faulted modules · communication failures · network relationships · affected control units.

ACTIVE TEST

Command supported components directly from their ECU to test actuators, relays, valves, motors, pumps, lighting, HVAC components, windows, locks and other manufacturer-specific systems.

ECU CODING

ECU Coding · Online Coding · Offline Coding · Variant Coding · Module Configuration · Replacement ECU Setup · Component Matching · Adaptation · Initialization · Personalization · Hidden Functions · Retrofit Configuration

J2534

SmartLink C can operate as a J2534 PassThru interface with compatible manufacturer OEM Windows software.

Depending on the OEM platform, this can support:

blank-module programming · replacement ECU programming · ECU software update · software restoration · module reflash.

D-PDU · RP1210

SmartLink C supports professional diagnostic communication architectures including D-PDU and RP1210 where applicable.

PIN DETECTION

Inspect supported OBD diagnostic socket pins, voltage status and communication protocols to identify connection problems before deeper diagnosis.

GUIDED

Supports guided diagnostic procedures on compatible vehicles, including VAG Guided Functions, basic settings, adaptations, calibration workflows, coding and replacement procedures.

60+

Oil Reset · EPB · ABS Bleeding · Battery Registration / BMS · DPF Regeneration · GPF · Injector Coding · SAS Calibration · Throttle Relearn · Transmission Adaptation · Gear Learning · TPMS Reset · Suspension Calibration · AdBlue Reset · NOx Reset · Coolant Bleeding · Window Initialization · Sunroof Initialization · Seat Calibration · Headlamp / AFS Calibration · Clutch Reset · Immobilizer Functions · Airbag Reset · Transport Mode · Language Change

plus additional manufacturer-specific service, matching, calibration and relearn procedures.

REMOTE

SmartLink C supports remote vehicle communication workflows for compatible remote diagnostic assistance and professional X-431 remote services.

J2534 PROGRAMMING

Connectivity & Technical Specifications

10.1-inch Android professional tablet with SmartLink C, dual-band Wi-Fi, Bluetooth, USB, CAN FD, DoIP and J2534 PassThru.

01 · CONNECTIVITY

02 · DISPLAY

TECH

Complete PRO3 V+ Elite Package

Professional diagnostic tablet, SmartLink C vehicle communication interface, connection equipment, charging accessories, storage case, software updates and technical support.

MAIN

DIAGNOSTIC

1× OBD-II Main Diagnostic Cable
1× Data / Communication Cable

POWER

1× USB Type-C / Data Cable
1× Power Adapter
Power / Charging Accessories

STORAGE

DOCUMENTATION

Product Activation Information
User Manual / Product Documentation

INCLUDED