Flagship OE-Level Diagnostic & ECU Programming Platform

13.3-inch flagship workshop architecture combining full-system diagnostics, network topology, advanced ECU programming, bidirectional testing and SmartLink remote communication.

TOPOLOGY

For supported vehicles, PAD VII Elite displays the electronic control-unit network as an interactive graphical topology map.

Technicians can quickly identify:

faulted modules · communication failures · ECU relationships · network architecture · affected control units

and enter supported systems directly from the topology screen.

FULL SYSTEM

PAD VII Elite performs complete electronic-system diagnosis across supported passenger and commercial vehicle networks.

Diagnostic access can include Engine · Transmission · ABS · SRS · BCM · Immobilizer · Steering · Suspension · HVAC · Instrument Cluster · TPMS · Gateway · ADAS · Parking · Lighting and additional installed control systems.

Available operations include ECU identification, AutoVIN, automatic scanning, DTCs, freeze-frame data, live data, graphing, recording, playback, adaptations, coding and professional diagnostic reporting.

SMARTLINK C

The included SmartLink C is a professional communication interface supporting passenger-car, commercial-vehicle, PassThru and remote diagnostic workflows.

Communication standards include CAN · CAN FD · DoIP · J2534 · D-PDU · RP1210, together with Wi-Fi, Bluetooth, USB and Ethernet-based communication depending on the diagnostic workflow.

PROGRAMMING

PAD VII Elite supports advanced manufacturer-dependent ECU coding and programming workflows.

Capabilities can include:

online programming · ECU firmware programming · module replacement programming · online coding · offline coding · variant coding · adaptation · initialization · personalization · parameter configuration.

Programming availability varies according to manufacturer, vehicle, region, account authorization and current LAUNCH software.

J2534

SmartLink C can operate as a professional J2534 PassThru interface with compatible OEM programming software installed on a Windows computer.

Depending on manufacturer support, this enables OEM workflows including:

blank-module programming · ECU software updates · module replacement programming · reflashing · software restoration.

OEM software, subscriptions and manufacturer accounts are not included.

ACTIVE TEST

Send commands directly to supported ECUs to activate vehicle components and verify their operation.

Tests can include pumps, injectors, fans, relays, valves, motors, lighting, windows, locks, HVAC components and additional manufacturer-specific actuators.

GUIDED

Guided diagnostic workflows simplify supported coding, adaptation, calibration, matching and basic-setting procedures.

Available for compatible Volkswagen · Audi · SEAT · Škoda applications.

SGW · SFD

PAD VII Elite is compatible with LAUNCH secure-gateway authorization solutions for supported:

Mercedes-Benz · FCA / Maserati · Renault / Dacia · Volkswagen Group SFD

Applicable licences and authorizations are optional unless specifically purchased separately.

REMOTE

SmartLink C supports professional remote vehicle communication workflows through the LAUNCH SmartLink ecosystem.

This allows compatible remote technicians and diagnostic platforms to communicate with the connected vehicle for advanced technical assistance.

REPORT

Generate and store vehicle health reports, DTC information, live-data records and pre-/post-repair diagnostic results for professional workshop and customer documentation.

Passenger Vehicles · SGW/SFD · EV · HD · Motorcycle · ADAS · IMMO

Flagship expandable workshop platform with extensive European, Asian and American coverage plus the complete professional LAUNCH expansion ecosystem.

EUROPE

Abarth · Alfa Romeo · Aston Martin · Audi · Bentley · BMW · Bugatti · Citroën · Dacia · Ferrari · Fiat · Ford Europe · Jaguar · Lamborghini · Lancia · Land Rover · Maserati · Maybach · Mercedes-Benz · MINI · Opel · Peugeot · Porsche · Renault · Rolls-Royce · Rover · Saab · SEAT · Škoda · Smart · Volkswagen · Volvo

plus additional regional and manufacturer software available through the X-431 software environment.

GLOBAL

Acura · Buick · Cadillac · Chevrolet · Chrysler · Dodge · Ford · GMC · Honda · Hyundai · Infiniti · Isuzu · Jeep · Kia · Lexus · Lincoln · Mazda · Mitsubishi · Nissan · Subaru · Suzuki · Toyota

plus broad Chinese and additional Asian manufacturer coverage.

SGW · SFD

PAD VII Elite is compatible with the optional LAUNCH European SGW Function License.

Secure-gateway licences are optional unless specifically purchased separately.

X-431 FIX

Compatible with the optional X-431 FIX / HaynesPro European repair-information database available through LAUNCH Mall.

EV

LAUNCH X431 EV Diagnostic Upgrade Kit + applicable software activation

Compatible for expanded New Energy, electric-vehicle and high-voltage battery diagnostic workflows.

HEAVY DUTY

PAD VII Elite can be expanded for Heavy Duty diagnostics using the LAUNCH HD Truck Software Authorization + HD Adapter Package.

Because SmartLink C is already included, the platform can use the existing professional VCI with the corresponding HD software and vehicle adapter package.

MOTORCYCLE

LAUNCH X431 Motorcycle Diagnostic Connector Kit 2.0 + applicable software activation

Compatible with supported BMW Motorrad, Honda, Yamaha, Kawasaki, Suzuki, Ducati, Harley-Davidson, Indian, Polaris, Victory and additional motorcycle applications.

ADAS

Compatible with LAUNCH X431 ADAS calibration equipment and the corresponding ADAS software activation for supported camera, radar and driver-assistance calibration procedures.

IMMO

TPMS

LAUNCH i-TPMS
LAUNCH TSGUN

Compatible for supported TPMS sensor activation, programming, diagnosis and relearn procedures.

MEASUREMENT

O2-2 ScopeBox Oscilloscope
S2-2 SensorBox
VSP-600 Videoscope
BST360 Battery Tester
EM101N EV Oscilloscope & Multimeter
EG100 EV Current Clamp
ES200 Insulation Resistance Tester
Compatible LAUNCH measurement modules
LAUNCH Wi-Fi Printer

OBD-I

Compatible with the LAUNCH OBD-I / non-16-pin adapter system for supported older vehicles using manufacturer-specific diagnostic connectors.

OPTIONAL EXPANSIONS

Topology · Online Programming · J2534 · Active Test · 60+ Services

Flagship workshop-level diagnostic, programming, coding, service and SmartLink remote diagnostic capabilities.

DIAG

AutoVIN · Automatic Vehicle Scan · ECU Information · Read DTCs · Clear DTCs · Freeze Frame · Live Data · Multi-Data Graphing · Recording · Playback · Diagnostic History · Vehicle Health Reports · Pre / Post Scan · Diagnostic Feedback

TOPOLOGY

Graphically displays supported vehicle ECU networks to identify:

faulted modules · communication failures · network relationships · affected control units.

ACTIVE TEST

Command supported components directly from their ECU to test actuators, relays, valves, motors, pumps, lighting, HVAC components, windows, locks and additional manufacturer-specific systems.

ECU CODING

ECU Coding · Online Coding · Offline Coding · Variant Coding · SCN Coding on Supported Applications · Module Configuration · Replacement ECU Setup · Component Matching · Adaptation · Initialization · Personalization · Parameter Configuration · Retrofit Configuration

PROGRAMMING

PAD VII Elite supports manufacturer-dependent online ECU programming workflows for supported vehicle brands.

Functions can include:

online programming · ECU firmware programming · blank-module programming · module replacement programming · software restoration · ECU software updates.

J2534

SmartLink C can operate as a J2534-1 / J2534-2 PassThru interface with compatible OEM Windows programming software.

Professional communication standards also include:

D-PDU · RP1210 · CAN FD · DoIP.

PIN DETECTION

PAD VII Elite can inspect supported diagnostic socket pin voltage and automatically detect available vehicle communication protocols.

This helps identify connection and communication faults before deeper diagnosis.

GUIDED

Supports guided diagnostic procedures on applicable vehicles, including Volkswagen · Audi · Škoda · SEAT basic settings, adaptations, calibration, coding and matching workflows.

60+

Oil Reset · EPB · ABS Bleeding · Battery Registration / BMS · DPF Regeneration · GPF Regeneration · Injector Coding · SAS Calibration · Throttle Relearn · Transmission Adaptation · Gear Learning · TPMS Reset · Suspension Calibration · AdBlue Reset · NOx Reset · Coolant Bleeding · Window Initialization · Sunroof Initialization · Seat Calibration · Headlamp / AFS Calibration · Clutch Reset · High-Voltage Battery Functions · Transport Mode · Air / Fuel Reset · Start / Stop Reset · Turbocharger Matching · Component Matching

plus additional manufacturer-specific service, reset, relearn, matching and calibration procedures.

REMOTE

SmartLink C supports remote vehicle communication workflows, allowing compatible remote diagnostic services and technicians to access the connected vehicle through the SmartLink network architecture.

ONLINE PROGRAMMING AVAILABILITY

Connectivity & Technical Specifications

13.3-inch flagship tablet with SmartLink C, dual-band Wi-Fi, Bluetooth, USB, Ethernet, HDMI, CAN FD, DoIP and professional PassThru protocols.

01 · CONNECTIVITY

02 · DISPLAY

TECH

Complete PAD VII Elite Package

Flagship diagnostic tablet, SmartLink C, vehicle connection equipment, communication cables, power accessories, storage case, software updates and technical support.

MAIN

DIAGNOSTIC

1× OBD-II Main / Extension Cable
1× USB Communication Cable
1× USB Type-C Cable
1× Ethernet / Network Cable
1× HDMI Cable

POWER

1× Power Adapter
1× Battery Clamp Power Cable
1× Cigarette Lighter Power Cable
EU Power Connection
UK Power Connection
US Power Connection
AU Power Connection
Replacement Fuse Set

STORAGE

DOCUMENTATION

1× Product Activation / PIN Envelope
1× Quick Start Guide
1× Packing / Software List
1× User Manual / Product Documentation

INCLUDED